25mm2 x 4 core copper conductor 600/1100V PVC insulated cable

Standards

The cable is manufactured according to IEC 60502.2, IEC 60502.1, AS/NZS 1429.1, AS/NZS 5000.1, BS 6622/7835, BS 5467, BS 6746, BS 6346, VDE 0276, ASTM, ABNT etc. It is suitable to be installed in the power line with rated voltage from (U0/U)0.6/1kV to 19/33kV for power transmission.

Application

The electric cable is applied to transmit and distribute power in power transmission and distribution system of 1kV~35kV or lower. It is widely adopted in the fields including power, construction, industry, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power  cable and in partial re-place of PVC insulation or XLPE power cable.

Type & Designation

Type	Description	Applications
N2XY/N2XSEY NA2XY/NA2XSEY	Cu or AL conductor XLPE insulated PVC sheathed power cables.	For laying indoors, in tunnels, in ducts. Able to bear extermal mechanical force but not large pulling forces. Single core cables are impermissible to be laid in magnetic ducts.
N2X2Y/N2XSE2Y NA2X2Y/NA2XSE2Y	Cu or AL conductor XLPE insulated PE sheathed power cables.
N2XBY/N2XSEBY NA2XBY/NA2XSEBY	Cu or AL conductor XLPE insulated PVC sheathed internal steel tape armoured power cables.	For laying indoors, in tunnels, in ducts and underground. Able to bear extermal mechanical force but not large pulling forces, Impermissible to use single core cable in A.C circuit.
N2XB2Y/N2XSEB2Y NA2XB2Y/NA2XSEB2Y	Cu or AL conductor XLPE insulated PE sheathed internal steel tape armoured power cables.
N2XRY/N2XSERY NA2XRY/NA2XSERY	Cu or AL conductor XLPE insulated PVC sheathed internal steel wire armoured power cables.	For laying in underground areas along route with large difference of elevation, in shafts and in water, able to bear a corresponding pulling forces and external mechanical forces.
N2XR2Y/N2XSER2Y NA2XR2Y/NA2XSER2Y	Cu or AL conductor XLPE insulated PE sheathed internal steel wire armoured power cables.

Cable Properties

Special features which we can offer for LV and MV cables:

* Watertight construction (both radial and longitudinal). 
* Resistant to heavy vibration.
* Available in long delivery lengths to reduce number of joints.
* Corrosion-free screen area.
* Copper or aluminum conductor up to 2500mm².
* Different options for outer PE jackets (LDPE, MDPE & HDPE).
* Different options for PVC, LSF, LSZH & FRPVC, being anti-termite or UV resistant as per 

   BS 7835, IEC 60332 etc.
* Strippable insulation screen.

* Increased armour conductivity by insertion of hard drawn copper wires in armour.

The maximum rated temperature

XLPE insulated,the maximum operating temperature of conductor shall exceed 90℃when the cable is used for long not period. The temperature of conductor shall not exceed 250℃ at short circuit for 5 seconds.

PVC insulated,the maximum operating temperature of conductor shall exceed 90℃ or 70 ℃  when the cable is used for long not period. PVC insulated the temperature of conductor shall not exceed 160℃ at short circuit for 5 seconds.

Installation requirement

The installation of cable is not limited by the difference of elevation along the route. The ambient temperature should not be below 0℃ during installation. The permissible bending radius for cable shall be complied with the following regulations:

For single-core: R>20(D+d) +/-5%

For multi-core: R>15(D+d) +/-5%

Where:R—bending radius (mm) , D—overall diameter of the cable (mm) , d—diameter of conductor (mm).

Single core cable of using in AC circuit shall be without armour or with steel wire armour and shall not be laid in magnetic ducs.

Rated voltage, No. of core and range of sectional area

Rate Voltage(kv): 0.6/1kV  1.8/3kV    3.6/6kV    6/10kV      8.7/15kV   12/20kV  

                         18/30kV  21/35kV  

    Equivalent to : 0.6/1kV  1.9/3.3kV  3.8/6.6kV  6.35/11kV  8.7/15kV   12.7/22kV 

                         19/33kV   21/35kV

No. of core and sectional area(mm2):

1 Core 1.5-800    25-800    25-1200    25-1200    35-1200    50-1200    50-1200 

          50-1200 
2 Core 1.5-185     25-185 
3 Core 1.5-400     25-400     25-400     25-400     35-400     50-400     50-400  

          50-400 
4 Core 2.5-400     25-400 
5 Core 2.5-400     25-400

email is :sales@hlcables.com

THHN THW THWN WIRE 18AWG 16AWG 14AWG 12AWG 10AWG 8AWG copper wire pvc insulation nylon jacket electric building cable.

Applications:

THHN building wire is meant for use as general purpose wiring for installation in conduit or other recognized raceway.

THHN may also be used for machine tool, appliance and control circuit wiring.

Description of usage properties
The nylon sheathed cable has more excellences in physical and electrical performance than the PVC cable.

The cable has smaller outer diameter, lighter weight, less static friction coefficient than the same size of PVC cable, which greatly improve safety and convenience in installation and assembly of the cable.
It is self-lubrication, and has good resistance to corrosion, oil, acids, alkali, and moisture.

The cable is widely used in fixed installation, home appliance, lighting equipment, construction and aviation engine room with voltage up to 450/750V.
Its permitted long term working temperature shall be 70°C or 90°C, installation temperature shall be over 0°C, and maximum bending radius shall be not less than 4 times of outer diameter of the cable.
Approvals:

· UL listed Stds. 83 & 1063 as: Type THHN Wire 90°C in dry locations, Type THWN Wire 75°C in wet locations.

· A-A-59544, NEMA WC-5, UL-758

· CSA approval upon request
Description:

· Conductor:Bare copper, Soft Drawn

· Insulation:PVC

· Jacket:NYLON

· Standard Colors(denoted by a dash and number code following the part number below): Black (-0), Brown (-1), Red (-2), Orange (-3), Yellow (-4), Green (-5), Blue (-6), Violet (-7), Gray (-8), White (-9), Pink (-10), Tan (-11); Striping and Other colors available upon request.
· 

Gasoline & oil resistant - Type MTW 90°C Machine Tool Wire (stranded only) 105°C AWM, 80°C where exposed to oil..

PLEASE LEAVE ME YOUR EMAIL ID , IF YOU WANT OUR FACTORY PRICE , THANKS .

OUR EMAIL ID IS sales@hlcables.com , telephone :0086 037166766667

China supplier electrical cable and wire Ecuador UAE 500 mcm electrical flexible cable wire Welding cable huadong factory

Construction

Conductor : Flexible Bare annealed copper wire or Tinned Copper wire

Insulation: Nitrile-Butadiene-PVC or Rubber Material or EPR

Sheath: Nitrile-Butadiene-PVC or Rubber Material or CSP



Choice of Black, Orange, Red or Yellow Blue jacket, single & double insulated.

SQ MM sizes (European style) 10 sq mm to 240 sq mm

AWG sizes (North American style) 6 Awg to 500 MCM

With sequential foot / meter marking

Wide temperature range: -55°C to 105°C

China supplier electrical cable and wire Ecuador UAE 500 mcm electrical flexible cable wire Welding cable huadong factory .
Working voltage: 100/100 volts
(450V for non-welding applications if suitably protected from mechanical damage)
Test voltage: 1000 volts
Minimum bending radius: 6xOverall diameter
Operating temperature: -25º C to +85º C
Flame retardant: IEC 60332.1


are used for the transmission of high currents from the electric welding machine to the welding tool. Welding cables are suitable for flexible use under rough conditions, on assembly lines and conveyor systems, in machine tool and motor car manufacturing, ship building, for manually and automatically operated line and spot welding machines.

Extra fine bare/tinned copper strands

Stranding to BS 6360 CL-6,or CL-5 (120mm² and above)

Synthetic or paper separator over core

EPR GP4(Ethylene Propylene Rubber) to BS7655

Polychloroprene rubber (neoprene) sheath EM5, HOFR (Heat and Oil Resistant and Flame Retardant) to BS7655 , black/ orange.

Low voltage copper conductor PVC insulated 2.5mm 3 core royal cord cable

 Low voltage copper conductor  PVC insulated  2.5mm  3 core royal cord cable

             PVC insulated PVC sheathed flat wire(BVVB)

• Solid or stranded, Pure copper or pure aluminum conductor ;
• Double PVC insulation;
• core number:2/3 core
• sectional area:0.75mm,1.0mm,1.5mm,2.5mm,4mm,6mm,10mm.
• Passed the UL VW-1 & CSA FT1 vertical flame test;
• Uniform thickness of wire to ensure easy stripping and cutting;
• Resistant to scids,oils,alkalies,moisture and fungus;
• Rated voltage:under or up to 450/750V;
• Standards Implemented: ISO9001,ISO14004,OHSASI8000,UKAS,FMRC,KEMA,TUV,CE,CESI,IEC and so on.

            PVC insulated PVC sheathed flat wire 

Type	Name	Properties
BVVB	Copper-core PVC insulated PVC sheathed flat wire	In normal case, max. temperature of conductor shall be 70℃
BLVVB	Aluminum-core PVC insulated PVC sheathed flat wire	In normal case, max. temperature of conductor shall be 70℃

                                                     Model: BVVB

Nom. Section(mm²)	Core/Dia.(mm)	Insulation thickness(mm)		Sheath thickness(mm)
		Nom.	Thinnest	Nom.	Thinnest
2*0.75	1/0.97	0.6	0.44	0.9	0.67
2*0.1	1/1.13	0.6	0.44	0.9	0.67
2*1.5	1/1.38	0.7	0.53	0.9	0.67
2*2.5	1/1.78	0.8	0.62	1	0.75
2*4	1/2.25	0.8	0.62	1	0.75
2*6	1/2.76	0.8	0.62	1.1	0.84
2*10	7/1.35	1	0.8	1.2	0.92
3*0.75	1/0.97	0.6	0.44	0.9	0.67
3*1	1/1.13	0.6	0.44	0.9	0.67
3*1.5	1/1.38	0.7	0.53	0.9	0.67
3*2.5	1/1.78	0.8	0.62	1	0.75
3*4	1/2.25	0.8	0.62	1.1	0.84
3*6	1/2.76	0.8	0.62	1.1	0.84
3*10	7/1.35	1	0.8	1.2	0.92